Skip to content
Let ideas be heard and improvements last.
Gemy

Learning paths

A quality engineer's first 90 days

Six lessons and a field guide that take a new quality engineer through problem solving, FMEA, calibration and supplier criteria in order.

Level:
Practitioner
Target role:
Quality engineer

Goal

By the end of the path you can apply the 8D steps, FMEA scope and its link to the control plan to your own work. You can also set up a calibration plan and supplier criteria. In the last step you run your first FMEA study with the guide.

Total lesson time: 6 min

Steps

  1. Lesson

    The eight steps of 8D

    First read the eight steps and the output of each.

    1 min

  2. Lesson

    Finding and verifying the root cause

    Then learn to verify the root cause with data.

    1 min

  3. Lesson

    Setting the FMEA team and scope

    To look for problems before they happen, read about the scope and team of an FMEA.

    1 min

  4. Lesson

    From FMEA to prevention and the control plan

    See how an FMEA row connects to the control plan.

    1 min

  5. Lesson

    Setting up a calibration plan

    Read about the calibration plan, so the measurements in the control plan are made with reliable devices.

    1 min

  6. Lesson

    Setting supplier criteria and the score

    Learn to set supplier criteria for the quality of bought-in material.

    1 min

  7. Field guide

    FMEA field guide: the first working session

    Finally, run your first FMEA session with your team using the guide.

Cookies

Essential cookies are needed for the site to work. Analytics cookies load only if you allow them; declining is as easy as accepting. You can change your choice at any time via the footer link.

Cookie policyPrivacy notice