The Machinery Safety Regulation (2023/1230/EU) was published by the Ministry of Industry and Technology in Türkiye's Official Gazette No. 33402 of 16 October 2026. It has 53 articles and 11 annexes. Some articles (for example 27–42) entered into force on publication; the rest enter into force on 20 January 2027 (article 52). The old regulation based on Directive 2006/42/EC is repealed by the same text (article 51).
On the EU side, the Regulation was adopted on 14 June 2023 and, according to the European Commission, applies on a mandatory basis from 20 January 2027. Under transitional article 1 of Türkiye's regulation, machinery placed on the market before 20 January 2027 in line with Directive 2006/42/EC may remain on the market.
What is a substantial modification?
The regulation (article 4/1-u) describes it roughly as a change made after the machine is placed on the market or put into service, by physical or digital means, that the manufacturer did not foresee or plan, and that creates a new hazard or increases an existing risk. It must also require either adding guards or protective devices that change the existing safety control system, or taking additional protective measures to ensure the machine's stability or mechanical strength.
The consequence matters: a natural or legal person who substantially modifies a machine is treated as the manufacturer (article 19). A non-professional user modifying a machine only for their own use is not.
What is in the product?
- Screening questions in management of change (a module the company switches on): the questions are the company's data. The ready-made starter pack brings five questions for machinery and three for software; the company can change, add or switch them off.
- A single “yes” makes the request a candidate. It cannot go to approval until a person the company has given expert permission writes a result with a reason (at least 10 characters). If an answer changes, the expert result is cleared and the old one stays in the history.
- The screen, PDF and notification all say the same thing: the final assessment belongs to your company's expert. The system does not decide.
- A “substantial change” flag on record types with a notification to the responsible person, and a legal deadline reminder for 20 January 2027. After the date the task does not close; it stays open as “late”.
This article is general information, not legal advice. Always rely on the current text in the Official Gazette.
Sources
You may copy and share this article with attribution (Gemy, https://www.gemydigital.com/en/blog/makine-emniyeti-yonetmeligi-20-ocak-2027).