How to set up document control: version, approval, distribution, withdrawal
In brief
Document control ensures the right version of the right document is with the right person. What ISO 9001 asks for, document types and numbering, the approval chain, distribution and reading, withdrawing the old version and the five most common gaps.
9 November 2026 · 6 min read
Sample company · demo dataRelease
ISO 9001 requires the documented information the quality management system needs to be created, updated and controlled; the purpose of control is that the document is available where and when it is needed and adequately protected. The ISO 9000 vocabulary defines concepts such as document, record, procedure and specification. The standard's language may look abstract, but its question on the floor is simple: which is the latest version of this instruction, who approved it, and is the copy in the operator's hands that one?
Document types and numbering
Types should be few and clear: policy, procedure, instruction, form, record. Each type has a template and an approval chain.
The numbering rule tells the type, the department and the sequence; a number is given once and never reused, even if the document is cancelled.
The version number and the effective date appear on every page.
Every document has an owner; the owner is responsible for its correctness, document control for its order.
The approval chain
Approval is built on three roles: author, reviewer and approver. The author is the person who knows the job; the reviewer represents the other areas the document affects; the approver holds the authority to put it in force. The three should not be the same person. Review comments are tied to the relevant line, not to the document as a whole; the author sees what changed and why, and it stays in the history. After approval the document does not change; every change is a new version.
Distribution and reading
An approved document coming into force does not mean it has been read. Distribution rests on a list: which unit or role must know this document? Everyone on the list receives a reading task and a record of who has read it is kept. For documents used on paper on the floor, a controlled copy routine is set up: every copy is numbered and its location is known. The unnumbered photocopy is where document control is breached most often.
Withdrawal
When the new version comes into force, the old version is withdrawn at the same moment; two versions cannot be on the floor at once. Withdrawal covers three things: the old electronic version being reachable only from the archive, controlled copies being collected, and people trained on the old version reading the new one. The old version is not deleted; in an audit and in an incident investigation, the answer to “which version was in force that day” is in the archive.
Change requests
The person who uses a document most sees the most errors, but does not hold the authority to change it. A change request closes that gap: the employee points out the gap, the document owner evaluates it and, if accepted, a new version is opened. A declined request is recorded with its reason. In a company without a change request routine, documents either never change or change off the record.
The five most common gaps
The document exists, the owner does not: a document whose owner has left is never updated.
Approval exists, reading does not: the person doing the job has not seen the document in force.
A new version exists, the old copy is on the floor: two instructions appear valid at once.
The version changed, the training did not: the competence record rests on the old version.
The document is in the system, the process is elsewhere: the instruction describes what was written, the floor does what is done. Kamishibai and internal audit find this gap.
From paper to the system: migration order
Uploading the procedures from a folder into a system is not document control; the real gain is having version, approval and reading information in one place. If the migration follows this order, when the auditor asks for a document's current version, change history and readers, the answer is on one screen.
Inventory: list current documents, owners and latest versions.
Document types and numbering: procedure, instruction, form.
Living documents first: start with instructions used on the floor.
Approval flow: author, reviewer, approver.
Reading groups: which unit should read which document?
Collecting old copies: with the controlled copy list.
A fictional example
At a food plant the internal auditor asked the operator on the filling line for the instruction in use. The copy on the operator's board was version four; the version in force in the system was six, and the temperature limit had changed between the two. The operator had never seen the new version, because the reading list covered only shift supervisors and the controlled copies were unnumbered; nobody knew which version the copy on the board was. The finding closed with three actions: the roles on the line were added to the reading list, the copies on the boards were replaced with numbered controlled copies, and the copies to be collected when a new version came into force were listed. At the next audit the same question was asked; this time the answer came from one screen.
Sample company · demo dataDocument editor
How it is done in Gemy
Documents are managed through the steps of writing, review, release, reading task, controlled copy and change request; types, numbers and statuses are company settings. Documents are written in templated types and changes are shown in red.
Review comments are tied to lines; release opens the new version, distributes reading tasks and withdraws the old version. Old versions stay in the change history.
Printed copies for the floor come out as numbered controlled copies; when a new version is released, it is known which copies to collect.
A guest auditor sees only the version in force, with time-limited, read-only access.
If the management of change module is on, a change request's document item does not count as done until the new revision is in force.
The document library supports ISO compliance work; certification is the job of the accredited body. The correctness of a document's content and the reader's understanding of it remain the responsibility of the document owner and the manager, not of the system.
In short
Document control ensures the right version of the right document is with the right person. Few and clear document types, a number given once, the author, reviewer and approver trio, list-based distribution with recorded reading, numbered controlled copies and an old version withdrawn at the same moment as the new one are the parts of the routine. A change request is the voice of the person who uses the document. The most common gaps are the ownerless document, the unread approval and the old copy left on the floor.
You may copy and share this article with attribution (Gemy, https://www.gemydigital.com/en/blog/dokuman-kontrolu-nasil-kurulur-surum-onay-dagitim-geri-cekme).
Every solved problem is a piece of knowledge; in most companies it leaves with the person who solved it. The four places where knowledge is lost, the view of ISO 30401 and ISO 9001, and five habits that make knowledge independent of people.
A supplier audit is a process, not a visit: which supplier, which question, which finding, which evidence. The audit principles of ISO 19011, the structure of the question list, finding classes and how the reply returns to the same record.
A change to a machine, a process or a material should not be applied before its impact is seen. OSHA's five questions, HSE's change procedure, the step-by-step path of a machine change and the temporary change trap.
8 November 2026 · 5 min
Cookies
Essential cookies are needed for the site to work. Analytics cookies load only if you allow them; declining is as easy as accepting. You can change your choice at any time via the footer link.