Company memory: why improvement knowledge gets lost and how to keep it
In brief
Every solved problem is a piece of knowledge; in most companies it leaves with the person who solved it. The four places where knowledge is lost, the view of ISO 30401 and ISO 9001, and five habits that make knowledge independent of people.
10 November 2026 · 5 min read
Sample company · demo dataKaizen record
In a plant the same problem is solved three times in three years: first by a foreman, then by an engineer, then by the newly arrived team leader. Each time from scratch. The two people in between have left, and the solution stayed in an e-mail or a notebook. ISO 9001 requires an organisation to determine, maintain and make available the knowledge needed to operate its processes; ISO 30401 treats knowledge management as a management system in its own right. Both standards point to the same fact: knowledge that stays with a person is the person's knowledge, not the organisation's.
Where knowledge is lost
At closure: when the problem is solved the record is closed, but the root cause and the solutions tried are not written. “Fixed” on its own teaches nothing.
At departure: the person carrying the knowledge leaves; the handover describes the tasks, not the lessons.
In scatter: the same topic sits in an e-mail, a meeting note, an Excel file and a phone; none of them can be searched.
In scaling: a solution found on one line is never heard of on the next; every line reinvents its own wheel.
Learning from incidents
The UK Health and Safety Executive (HSE) treats learning from incidents as its own human factors topic and stresses that learning is possible only when the conditions beneath the incident are recorded, not just the incident itself. The same principle applies to improvement: the value of a Kaizen lies not only in its result but in writing down what was tried and what did not work. If the failed trial is not written, the next team runs the same trial again.
Five habits that make knowledge independent of people
A closure standard: three fields are filled when any record closes; the root cause, the solution applied, and the solutions tried and dropped. The third field is often the most valuable.
Writing with the source: which standard, which measurement, which photo the solution rests on; the link sits inside the record.
Keeping it searchable: a record must be found not only by its number but by its machine, its fault and its symptom. Knowledge that cannot be searched does not exist.
Spreading it: the Yokoten concept in the Lean Enterprise Institute lexicon is the horizontal transfer of what was learned in one place to similar places. Every successful solution goes to similar areas as a suggestion; each area applies, adapts or declines with a reason.
Writing it into the standard: a solution that works moves into the work instruction, the maintenance standard or the checklist; otherwise the practice changes when the people change.
Memory is not the same as an archive
An archive keeps everything; memory finds what is needed. A company that cannot find the right record among ten thousand has an archive, not a memory. The measure of memory is a question: when a new problem is opened, how many minutes and how much confidence does it take to answer “has this happened before?” A good memory answers that question with its source; which record the answer rests on is visible and reachable. An answer without a source is a guess.
The manager's job
Company memory is not a software feature but a management habit. The manager checks that the three fields are filled before closing a record; asks the team “what did we do in the past” when a new problem is opened; and adds the question “what did you learn most” to the handover of a person who is leaving. If these three questions are not asked, even the best search tool searches among empty records.
A fictional example
At a plastic injection plant the new team leader faced a recurring sink mark defect on one product. Searching the system by the product's name, he found a Kaizen record closed two years earlier: the same defect, root cause mould temperature, two solutions tried and dropped, and the third one that worked, with photos. The person who had opened the record had left the company; the record was still there. The team leader applied the third solution the same day and saw the defect stop within a week. Then he did one more thing: he added the note “recurred, same solution worked” to the old record and wrote the mould temperature into the new version of the work instruction. Nobody would start from scratch a third time.
Sample company · demo dataSmart features settings
How it is done in Gemy
Kaizen, CAPA, OHS events and other records close with the root cause, the change applied, before and after photos and the history of decisions; records are not deleted.
If the company memory feature is on, similar records and past solutions are shown with their sources when a new record is opened; questions can be asked of past records and the answer comes with its source; only records the person is allowed to see are searched. The company chooses the AI and the service, and it is off by default.
If the company switches on roll-out, a successful piece of work goes to similar areas as a suggestion; each area's decision and reason stay recorded.
A change that works is written into the new version of the work instruction; the old version stays in the change history.
The system keeps and finds the records; what goes into a record and which question is asked of a departing person is still the manager's decision.
In short
Improvement knowledge is lost in four places: an empty closure, a departure, scatter and scaling. ISO 9001 asks for that knowledge to be determined and made available, ISO 30401 for knowledge management as a system. Five habits make knowledge independent of people: closing with the root cause and the dropped trials, writing with the source, keeping it searchable, spreading it and writing it into the standard. An archive keeps everything, memory finds what is needed; the measure of memory is the sourced answer to “has this happened before?”
You may copy and share this article with attribution (Gemy, https://www.gemydigital.com/en/blog/kurumsal-hafiza-iyilestirme-bilgisi-neden-kaybolur-nasil-saklanir).
A supplier audit is a process, not a visit: which supplier, which question, which finding, which evidence. The audit principles of ISO 19011, the structure of the question list, finding classes and how the reply returns to the same record.
Document control ensures the right version of the right document is with the right person. What ISO 9001 asks for, document types and numbering, the approval chain, distribution and reading, withdrawing the old version and the five most common gaps.
A change to a machine, a process or a material should not be applied before its impact is seen. OSHA's five questions, HSE's change procedure, the step-by-step path of a machine change and the temporary change trap.
8 November 2026 · 5 min
Cookies
Essential cookies are needed for the site to work. Analytics cookies load only if you allow them; declining is as easy as accepting. You can change your choice at any time via the footer link.