Risk assessment with 5×5 and Fine-Kinney
Reading the score, the threshold and the control
Calculating the 5×5 and Fine-Kinney score, writing the threshold in advance and choosing the control by the hierarchy of controls.
- Level:
- Practitioner
- Who it is for:
- Safety specialist, Plant manager
- Duration:
- 1 min
In this lesson
- Calculate the 5×5 and Fine-Kinney score
- Write the threshold before scoring
- Choose the control by the hierarchy of controls
The score tells you which of two risks to deal with first. On its own it does not prove that a risk is acceptable. That is why the scale definitions, the threshold and the control matter as much as the score.
Two methods, the same logic
- 5×5 matrix: likelihood and severity are scored from one to five, and the score is their product.
- Fine-Kinney: probability, frequency of exposure and severity are multiplied; the scale steps are not evenly spaced.
- In both methods each step has a written meaning, so a "three" means the same to everyone.
In Fine-Kinney the gaps between severity steps are large, so a serious outcome weighs heavily in the score. Even so, a rare hazard with a fatal outcome can score below a frequent minor one. Review rows in the highest severity steps separately, whatever their score.
Write the threshold in advance
Before scoring, write which score falls into which level and what is done at each level. Compare your own thresholds with the method's published classification. If you use fewer levels, write down clearly which bands you merged.
Choose the control by the hierarchy
The order of controls is: remove the hazard, replace it with something less hazardous, engineering controls, administrative controls and personal protective equipment. The higher rungs depend less on how people behave. Once the control is in place, score the row again and keep both scores.
Check yourself
There is no score; tap a question to see the answer.
Does the score prove that a risk is acceptable?
No; the score ranks, and the written threshold and the control make the decision.
Does the score drop once a control is planned?
No; the score is given again once the control is in place and seen to work.
What is the last rung of the hierarchy of controls?
Personal protective equipment; the higher rungs are considered first.
Related tool
Sources
- Managing risks and risk assessment at work, Health and Safety Executive (HSE) (accessed 16 November 2026)
- ISO 31000:2018 Risk management, Guidelines, International Organization for Standardization (ISO) (accessed 16 November 2026)
- Hierarchy of Controls, National Institute for Occupational Safety and Health (NIOSH) (accessed 16 November 2026)