Field guide
Risk assessment field guide: walking one area
Preparing the risk assessment of one area, the steps of the walk on the floor and what you should have at the end of it.
- Level:
- Practitioner
- Who it is for:
- Safety specialist, Shift supervisor
Preparation
- Set the assessment team and the area you will walk.
- Take the area's event, near-miss and maintenance records with you.
- Print the company's scoring scale and thresholds so everyone in the team sees the same definitions.
Steps
Walk the area with the person who does the job
In each part ask about normal running, maintenance, cleaning and breakdowns.
Write the hazard on a row
Put the hazard, the person affected, the job and today's control on the same row.
Score as a team
One person does not give the score; looking at the scale definitions, the team scores the raw risk and then the residual risk together.
Write the control and the owner
For every row above the threshold, set a control from the hierarchy, an owner and a due date.
Output
At the end of the walk you have a list of rows with the hazards, the people affected and today's controls. For the rows above the threshold, controls with an owner and a due date are set as well.
Templates
Risk assessment table (5×5)
Sources
- İş Sağlığı ve Güvenliği Risk Değerlendirmesi Yönetmeliği (Resmî Gazete 29.12.2012, sayı 28512), T.C. Resmî Gazete (accessed 16 November 2026)
- Safety Management: Hazard Identification and Assessment, Occupational Safety and Health Administration (OSHA) (accessed 16 November 2026)
- Managing risks and risk assessment at work, Health and Safety Executive (HSE) (accessed 16 November 2026)