Skip to content
Let ideas be heard and improvements last.
Gemy

Tools

Find the MTBF and MTTR of equipment

Enter the time the equipment ran in a period, the number of failures and the total repair time. The tool calculates the mean time between failures, the mean time to repair and the availability.

In short

The MTBF / MTTR calculator shows from failure records how often equipment breaks down and how long repairs take. Availability is calculated from these two averages.

  • The calculation runs in your browser; nothing is sent
  • Every intermediate value is written with its formula under How was this calculated?
  • The result is a calculation that rests on the values you enter
  • With no failures, MTBF and MTTR are not calculated

Calculate MTBF, MTTR and availability

Formula: MTBF = running time ÷ failures; MTTR = repair time ÷ failures; availability = MTBF ÷ (MTBF + MTTR)

Sample values

The time the equipment ran in the period; repair time is not included.

Failures that stopped the equipment in the same period; at least 1.

The total of the times from failure until the equipment ran again.

Result

MTBF (mean time between failures)
80 hours
MTTR (mean time to repair)
1.5 hours
Availability
98.2%

How was this calculated?

  1. MTBF = 640 hours ÷ 8 failures = 80 hours
  2. MTTR = 12 hours ÷ 8 failures = 1.5 hours
  3. Availability = 80 ÷ (80 + 1.5) = 98.2%

This is a calculation; it rests on the values you entered.

In a period with no failures MTBF and MTTR are not calculated, because that would divide by zero. Hours are shown rounded to two decimals; the calculation uses the unrounded values.

The calculation runs in your browser; the values you enter are not sent anywhere or stored.

Method and formula

MTBF tells you how long the equipment runs on average between failures; MTTR tells you how long a failure takes to fix on average. Raising MTBF is maintenance and root cause work; cutting MTTR is about spare parts, instructions and skills. This measure is not in Gemy today; the tool is here to explain the method.

Formula: MTBF = running time ÷ failures; MTTR = repair time ÷ failures; availability = MTBF ÷ (MTBF + MTTR). General reliability engineering definitions (NIST reliability handbook); this measure is not in Gemy today.

Related term: read it in the glossary.

Sources

NIST/SEMATECH e-Handbook, constant repair rate model and MTBF estimate.

Lean Enterprise Institute, "Total Productive Maintenance".

Other calculators

Every calculator and template, from OEE to the risk score, on one page.

Cookies

Essential cookies are needed for the site to work. Analytics cookies load only if you allow them; declining is as easy as accepting. You can change your choice at any time via the footer link.

Cookie policyPrivacy notice