Skip to content
Let ideas be heard and improvements last.
Gemy

Glossary

What is TPM (total productive maintenance)?

A short definition of TPM (total productive maintenance), how it is applied on the floor and where it lives in the product.

Short definition
TPM (total productive maintenance): An approach in which operators, maintenance and management reduce machine losses together; autonomous maintenance (operators cleaning, inspecting and lubricating) and focused improvement are its main pillars.
Also known as
total productive maintenance

How is it applied?

The operator cleans, inspects and lubricates the machine every day (CIL); any abnormality seen gets a tag, and maintenance closes the tag. Measured losses become Kobetsu Kaizen projects. Fictional example: during the daily check the operator sees a loose belt and opens a tag; maintenance replaces the belt before it fails. TPM is often mistaken for the maintenance department's job alone: in TPM the operator also owns the basic care of the machine.

In the product

In the product autonomous maintenance checklists (CIL) and abnormality tags are filled in from a phone; a tag closes on the action backbone and, if the floor plan is on, shows as a pin on it. Focused improvement runs as a Kobetsu record. Switched on by the company.

Cookies

Essential cookies are needed for the site to work. Analytics cookies load only if you allow them; declining is as easy as accepting. You can change your choice at any time via the footer link.

Cookie policyPrivacy notice