Skip to content
Let ideas be heard and improvements last.
Gemy

Glossary

What is SMED (quick changeover)?

A short definition of SMED (quick changeover), how it is applied on the floor and where it lives in the product.

Short definition
SMED (quick changeover): Single-Minute Exchange of Die: a method for shortening die or product changeover time; it splits changeover steps into internal (machine stopped) and external (machine running).
Also known as
quick changeover

How is it applied?

The current changeover is timed step by step with a stopwatch; internal steps that can be moved outside are identified, the remaining internal steps are shortened, the new sequence becomes the standard and the next changeover is measured again. Fictional example: the tools needed and the next die are brought to the machine before the changeover. This preparation is now done while the machine runs. SMED is often confused with rushing the changeover: the aim is not haste but moving internal steps outside and shortening machine downtime.

In the product

In the product the time study keeps stopwatch step timing, the internal/external split and a before/after comparison; the Yamazumi chart with a takt line is part of the same study. Switched on by the company.

Cookies

Essential cookies are needed for the site to work. Analytics cookies load only if you allow them; declining is as easy as accepting. You can change your choice at any time via the footer link.

Cookie policyPrivacy notice