Skip to content
Let ideas be heard and improvements last.
Gemy

OHS: incident reporting, near misses and work permits

In brief

Reporting hazards seen in the field, incident investigation, permit prerequisites and inspections. The occupational health and safety module.

20 September 2026 · 1 min read

Sample company · demo dataOHS board: to-dos, accidents, lost days, accident frequency and severity rates
OHS board

The most valuable safety data is the near miss reported before an accident. Reporting takes a few taps on a phone; a photo and location can be added.

Sample company · demo dataOHS report on a phone: incident type on the first of three steps
OHS report, phone

From incident to action

  • Incident record: type, place, person affected and first response.
  • Investigation: root-cause work and witnesses.
  • Actions: go to the central action list with evidence rules.
  • Indicators: accident-free days and rates by hours worked.
Sample company · demo dataOHS incident record: incident details, official notification warning and investigator
OHS incident record

Work permits

A permit request is opened for hot work, work at height or confined spaces. It cannot go to approval until the prerequisites defined by the company are ticked; the approval flow belongs to the company too.

Sample company · demo dataWork permit: permit details and a worker's missing prerequisite; it cannot be approved while one is missing
Work permit

PPE issues, periodic inspections and health surveillance records live in the same module; health data is protected by a separate permission.

You may copy and share this article with attribution (Gemy, https://www.gemydigital.com/en/blog/isg-olay-bildirimi-ve-is-izni).

Related posts

Cookies

Essential cookies are needed for the site to work. Analytics cookies load only if you allow them; declining is as easy as accepting. You can change your choice at any time via the footer link.

Cookie policyPrivacy notice