Kamishibai and layered audits
Setting up Kamishibai cards and layers
Writing card questions short and visible, setting up layers and frequency, and reading the result on the board.
- Level:
- Practitioner
- Who it is for:
- Shift supervisor, Quality engineer
- Duration:
- 1 min
In this lesson
- Write card questions that are short and visible on the floor
- Set up the layers and the frequency
- Read the result on the board and tie it to actions
A Kamishibai card is short enough to answer in a few minutes. A long list sends the auditor back to the desk. The card works because it is asked often and on site.
Write questions that can be seen
As AIAG advises, a question should be objective and specific. "Is the area tidy?" means something different to everyone. "Is the torque mark a straight line across bolt and nut?" can be answered by eye.
- Write how the question is checked: by looking, counting or asking.
- Add a photo of the right state to the card.
- Keep only a few questions on one card.
Set up the layers
A layer is a management level that goes to the floor. A lower layer looks often and narrowly, an upper layer rarely and widely. Your company writes which layer goes how often, to fit its own structure.
Read the board
In LEI's description, the board shows whether an audit happened, its result and the countermeasure. A missed audit is a finding too. Every card with an unmet item is tied to an owner and a due date.
Check yourself
There is no score; tap a question to see the answer.
Why is "Is the area tidy?" not a good card question?
It is neither objective nor specific; each auditor looks at something else.
Why is a missed audit discussed on the board?
A missed audit is a finding too; if nobody discusses it, the schedule stays on paper.
Sources
- Kamishibai Board, Lean Enterprise Institute (accessed 16 November 2026)
- Detail and Examples Promote More Effective Layered Process Audits (2014), Automotive Industry Action Group (AIAG) (accessed 16 November 2026)