The 5S workplace programme
Why 5S helps and where to start
What 5S changes on the floor and how to choose the first area.
- Level:
- Introductory
- Who it is for:
- Shift supervisor, Lean and OPEX specialist
- Duration:
- 1 min
In this lesson
- Explain the five 5S steps in your own words
- Choose the first audit area
- Set up a red-tag zone
The real job of 5S is to let everyone see when something goes wrong in the area. On a tidy bench a missing spanner stands out at once. On a cluttered bench the same gap goes unnoticed for days.
Choose the first area
Do not start with the whole plant. Pick a small area that everyone walks past and whose problems are known. A die-change zone or an assembly cell is a good start.
Name the area owner from the outset. The owner is the person who receives and follows up the audit findings.
Start with sorting
Turn one corner of the area into a red-tag zone. Hang a tag on every item that may not be needed for the work and write the date and who tagged it. When the period you set is over, decide what happens to it: scrap, store or another area.
- Write the item name, the date and the person who will decide on the tag.
- Do not let the zone become a permanent store.
- Make the decision together with the area team.
At the end of the first week, take a photo of the area. This photo is the first picture you will compare against in later audits.
Check yourself
There is no score; tap a question to see the answer.
What is the real job of 5S on the floor?
Letting people tell normal from abnormal at a glance, so anything missing or wrong becomes visible.
Why should the red-tag zone have a time limit?
Without one the zone turns into a permanent store and the sorting decision is never made.
Sources
- Lean Thinking and Methods: 5S, U.S. Environmental Protection Agency (accessed 15 November 2026)
- 5S, Lean Enterprise Institute (accessed 15 November 2026)