Skip to content
Let ideas be heard and improvements last.
Gemy

Glossary

What is One-piece flow?

A short definition of One-piece flow, how it is applied on the floor and where it lives in the product.

Short definition
One-piece flow: Parts moving one at a time from station to station without waiting in batches; waiting, stock and the spread of defects fall.

How is it applied?

Stations are set up close together, cycle times are balanced and the stock between them is removed; a defect is seen at the next station right away and a whole batch of defects is never made. It is tried on one line first. Fictional example: the crates waiting in batches between three stations are removed and parts pass hand to hand in a U-shaped cell. A dimension error is then noticed on the first part, not at the end of the batch. One-piece flow is often confused with working faster: the aim is not speed but parts moving on without waiting. If station cycle times are not balanced, the flow breaks.

In the product

The product has no flow design tool: a cell layout change is made as a Kaizen record (before/after, gain calculation, sustainment follow-up) and station balance is measured in the time study (switched on by the company).

Cookies

Essential cookies are needed for the site to work. Analytics cookies load only if you allow them; declining is as easy as accepting. You can change your choice at any time via the footer link.

Cookie policyPrivacy notice