Skip to content
Let ideas be heard and improvements last.
Gemy

Glossary

What is Mean time between failures (MTBF)?

A short definition of Mean time between failures (MTBF), how it is applied on the floor and where it lives in the product.

Short definition
Mean time between failures (MTBF): A measure of how long a repairable piece of equipment runs, on average, between two failures: total operating time divided by the number of failures.
Also known as
MTBF

How is it applied?

Only operating time goes into the calculation; planned stops and maintenance are left out. The average repair time is MTTR: total repair time divided by the number of repairs. The two are read together: one tells you how often you stop, the other how long. Fictional example: a press runs 400 hours in a month and fails four times; the MTBF is 100 hours. With few failures the average misleads, so the failure list is read as well. MTBF is often confused with the life of the equipment: it is an average interval, not a date of failure.

In the product

The product does not calculate MTBF or MTTR. Maintenance and breakdown work orders for devices are kept on the device card.

Cookies

Essential cookies are needed for the site to work. Analytics cookies load only if you allow them; declining is as easy as accepting. You can change your choice at any time via the footer link.

Cookie policyPrivacy notice