Skip to content
Let ideas be heard and improvements last.
Gemy

Glossary

What is Jidoka (autonomation)?

A short definition of Jidoka (autonomation), how it is applied on the floor and where it lives in the product.

Short definition
Jidoka (autonomation): A machine or a person stopping the process when an abnormality appears so the defect does not move to the next step; automation with a human touch.
Also known as
autonomation

How is it applied?

When an out-of-limit measurement, a missing part or a jam is seen the line stops, the cause is fixed on the spot and work continues. Everyone has the authority to stop; a stop costs less than a defective product. Fictional example: a press stops when it senses a missing part, the operator removes the cause and the line restarts. Jidoka is often confused with full automation. Automation does work in place of people; Jidoka stops at an abnormality and calls a person to the problem.

In the product

The product has no separate Jidoka module: in a work instruction an out-of-limit measurement gives a warning and a failed run opens an action or abnormality tag; stoppages are entered by hand in OEE (both switched on by the company).

Cookies

Essential cookies are needed for the site to work. Analytics cookies load only if you allow them; declining is as easy as accepting. You can change your choice at any time via the footer link.

Cookie policyPrivacy notice