Skip to content
Let ideas be heard and improvements last.
Gemy

Glossary

What is Cycle time?

A short definition of Cycle time, how it is applied on the floor and where it lives in the product.

Short definition
Cycle time: The time one unit of work takes at a station from start to finish; comparing it with takt time reads the balance of the line.

How is it applied?

A few cycles are timed with a stopwatch and the shortest repeatable time is taken; a station above takt is the bottleneck, one far below it waits. Balancing shifts work between stations. Fictional example: if one measured cycle is clearly longer than the rest, it is noted apart and its cause, such as missing material, is checked. Cycle time is often confused with takt time: takt is the target rhythm from customer demand, cycle time is measured at the station. The flow time from a product's entry to its exit from the line is a separate measure.

In the product

In the product cycle time is measured step by step with a stopwatch in the time study and station times line up on the Yamazumi chart with a takt line; the before/after comparison stays in the same study. Switched on by the company.

Cookies

Essential cookies are needed for the site to work. Analytics cookies load only if you allow them; declining is as easy as accepting. You can change your choice at any time via the footer link.

Cookie policyPrivacy notice